Register to Become a DistributorRegister now to get started and for advanced distributor features.

lock and key

Sign in to your account.

Account Login

Have you forgotten your password?      

Double Success for UK Water Company   You are here: Home » News Detail

30th September 2019

Twin module S50 with S320H

Leading Wastewater Sampler manufacturer Aquamatic are never surprised by new and occasionally unusual Sampling requests. During a visit to a major water company site last year Aquamatic’s Sales Manager Dominic McGivern was presented with an interesting challenge.

A composite sample was required from an unusually wide (6 metre) effluent channel on a large wastewater treatment plant. A small bridge crossing the effluent channel was highlighted as being the ideal location for the sampling equipment. The channel has a number of contributory flows feeding into it, as a result the effluent composition and flow across the channel varied dramatically, therefore raising concerns that a single composite sample may not be fully representative of the channel as a whole. So far fairly straightforward!

Fitting a mixer upstream of the sample point had previously been considered but rejected due to the size and cost of an appropriate mixing system needed for such a wide channel. Aquamatic were therefore asked to provide a refrigerated sampling solution to extract samples from 4 positions across the channel width. The equipment had to be MCERTS Certified and represent a cost effective solution to the problem.

It was then that the real complication of this requirement became clear, the width of the channel in question was not sufficient to allow for the installation of 4 individual Stationary Samplers. After consideration of the customers technical requirements, the idea of a twin module version of our ever popular 4 model Aquacell S300 Sampler Series was agreed and put into development. This solution had the benefit of being cheaper than separate individual Aquacell S300 Series samplers and most importantly occupied a much smaller footprint on the bridge. The new unit incorporates 2 of the MCERTS Certified Aquacell Sampling Modules which sit at the core of every Aquamatic Sampler.

Dominic commented: ‘This solution is now installed and running on the customers site and their feedback is that they see it as a great response to their slightly unusual site set up. Another great spin off from this development is that the new combined Aquacell S50 with S300 Series option also represents a fantastic solution where a treatment works is very small and therefore the influent and final effluent sampling points are close enough together to be served by one stationary sampler, we already have a number of enquires like this! We hope this recent success will further enhance our reputation as a leading supplier of Wastewater Samplers to the UK and the rest of the world.’